Skip to Content Top
YOUR "GO-TO" iNSULATiON CONTRACTOR iFOAM of Alpharetta

BATT Insulation Contractor for Homes & Businesses

At iFOAM of Alpharetta, we install BATT Insulation for residential and commercial properties using a proven national process and locally trained crews. Our insulation installers trained in the iFOAM way follow detailed standards so your insulation is installed correctly the first time for lasting comfort and efficiency.

Because we offer BATT Insulation alongside Spray Foam Insulation, Blown-In Cellulose Insulation, Blown-In Fiberglass Insulation, Blown-In Netting Insulation, Air Sealing, Insulation Removal, and Crawl Space Encapsulation, you get one trusted contractor for every insulation need on your property.

BATT Insulation is one of the most widely used and cost-effective options for open framing. It is typically made from Fiberglass (BATT) Insulation or mineral wool and comes pre-cut to fit between wall studs, floor joists, and ceiling rafters, which makes it an excellent fit for new construction, additions, and renovation projects where wall cavities are open.

We are proud members of ICAA (Insulation Contractors Association of America) and SPFA (Spray Polyurethane Foam Alliance), which supports our commitment to quality work and industry best practices.

Call iFOAM of Alpharetta at (470) 536-4273 to schedule a free consultation for your BATT Insulation project and get a clear plan to improve comfort and energy efficiency.

Why Choose iFOAM of Alpharetta for BATT Insulation

Choosing the right BATT Insulation contractor matters because proper installation has a direct impact on comfort and potential energy savings. Our insulation installers trained in the iFOAM way are taught how to fit batts correctly around pipes, wires, and electrical boxes, so the material can perform closer to its rated R-value.

We start with a professional assessment where we look at your framing, current insulation, and goals. From there, we recommend the insulation solution that fits your property, whether that is BATT Insulation alone or BATT Insulation paired with Spray Foam Insulation, Blown-In options, or Air Sealing for added performance.

Our step-by-step process runs from free consultation and detailed proposal through professional installation, quality verification, cleanup, and a final walk-through. We use high-quality materials and industry-leading techniques and integrate safety protocols throughout the project to protect your home or business.

Improperly installed BATT Insulation with gaps, compression, or voids around obstacles can significantly reduce thermal resistance even when the right product is selected. Our goal is to avoid those common issues so you can enjoy the full benefit of your insulation investment.

Benefits of BATT Insulation in Alpharetta’s Climate

Alpharetta and the North Atlanta area sit in Georgia Climate Zone 3, where hot, humid summers and cooler, variable winters put a constant load on your HVAC system. Properly installed BATT Insulation reduces heat transfer through walls, floors, and ceilings, which can help maintain more consistent indoor temperatures and reduce strain on HVAC performance.

By improving thermal resistance in key areas, BATT Insulation can contribute to better energy efficiency and has the potential to lower heating and cooling costs over time. Many homeowners also notice fewer drafts and a more even feel from room to room after upgrading insulation.

Both Fiberglass (BATT) Insulation and mineral wool BATT help reduce noise transmission between rooms and between floors. That makes BATT Insulation an effective option not just for exterior wall cavity insulation, but also for interior walls around bedrooms, offices, and media rooms where a quieter environment is important.

For Georgia Climate Zone 3, the U.S. Department of Energy commonly recommends R-13 to R-15 for exterior walls and R-19 to R-21 for floors above unconditioned spaces. During your assessment, we discuss recommended R-value targets and how they apply to your specific project so you can make informed decisions.

BATT Insulation Applications for Your Property

iFOAM of Alpharetta installs BATT Insulation in a wide range of residential and commercial applications, from new construction framing to targeted upgrades in existing buildings. Because batts are designed for open cavities, they are especially efficient to install when walls, floors, or ceilings are accessible.

  • Exterior and interior walls: Wall cavity insulation with BATT Insulation provides thermal resistance and helps control sound transfer between rooms and between conditioned and unconditioned spaces.
  • Floors over unconditioned areas: Floor systems above crawl spaces, basements, or garages benefit from BATT Insulation to reduce energy loss and improve comfort in the rooms above.
  • Attic rafters and flat ceilings: In some projects, BATT Insulation is installed between rafters or joists as part of an overall attic insulation plan.
  • Band joists and rim joists: The band joist where the foundation meets the floor framing is a common air leakage point. BATT Insulation combined with targeted Air Sealing can help reduce drafts around these areas.
  • New construction and additions: BATT Insulation is especially cost-effective during new construction and major renovations when framing is open and easy to access.

We handle new construction, additions, and retrofit insulation projects. Whether you are building a new home, finishing a basement, or upgrading a commercial space, we tailor the BATT Insulation approach to your framing, budget, and performance goals.

BATT Insulation Material Options

Different properties and spaces call for different materials. During your free assessment, we review the pros and cons of each BATT Insulation option and help you choose what fits your needs, budget, and code requirements.

Fiberglass (BATT) Insulation
Fiberglass (BATT) Insulation is one of the most common and affordable options for standard residential walls and ceilings. It typically delivers about R-3.2 to R-3.8 per inch depending on product density and installation conditions. It comes in pre-cut batts sized to fit common stud and joist spacing, with faced and unfaced options available to align with building code and moisture considerations.

Mineral wool BATT Insulation
Mineral wool BATT Insulation is manufactured from rock or slag fibers and is known for higher fire resistance, with a melting point often above 2,000 degrees Fahrenheit. It also offers strong sound dampening and natural water resistance and typically achieves around R-3.3 to R-4.2 per inch. Mineral wool is often preferred in fire-rated wall assemblies, certain commercial applications, and areas where moisture is more likely.

Both Fiberglass (BATT) Insulation and mineral wool BATT are available in standard dimensions to match typical 2x4 and 2x6 framing, with options that can be adapted for non-standard spaces. We use high-quality materials from trusted manufacturers and focus on installing them in a way that supports their designed performance.

Our BATT Insulation Installation Process

We want your BATT Insulation project to feel straightforward and low-stress from the first call to the final inspection. Our process is designed to give you clear expectations at every step.

Free assessment
We start with a free assessment of your home or building. We evaluate existing insulation levels, look for air leakage points, review accessible wall and floor cavities, and discuss comfort issues you are experiencing. Then we provide honest recommendations and a written estimate.

Professional installation
On installation day, our insulation installers trained in the iFOAM way arrive on time, protect work areas, and install BATT Insulation with attention to detail. We focus on fitting batts snugly in each cavity without gaps or compression, and on careful trimming around electrical boxes, wiring, and plumbing.

Quality check and cleanup
After installation, we verify that the work matches the plan and our quality standards. We remove debris and leave the space as clean as we can, so you are not left with a mess when we are finished.

Final inspection and warranty
We walk the project with you, answer questions, and review what was installed. BATT Insulation installations from iFOAM of Alpharetta are backed by a 5-year limited workmanship warranty, giving you added confidence in the work we perform.

Frequently Asked Questions about BATT Insulation

Is BATT Insulation or Spray Foam Insulation better for my Alpharetta home?

BATT Insulation is a strong fit for new construction, additions, and open-cavity renovations where framing is exposed. Spray Foam Insulation provides superior air sealing and is often preferred for irregular cavities, complex retrofit situations, and areas where air leakage is a major concern. During your free assessment, we review your goals and framing conditions and recommend the option or combination that fits your property.

Can BATT Insulation help with noise between rooms?

Yes. Both Fiberglass (BATT) Insulation and mineral wool BATT reduce sound transfer between rooms and between floors. Mineral wool typically offers stronger acoustic performance and is often chosen for interior partitions around bedrooms, offices, and media spaces where sound control is important.

How long does BATT Insulation last?

When properly installed and kept dry, BATT Insulation is designed for long-term performance. Professional installation by trained crews, combined with moisture management and proper Air Sealing where needed, helps support the effective service life of the insulation.

Does BATT Insulation require a vapor barrier in Georgia?

In many Georgia Climate Zone 3 applications, building codes call for a facing or separate vapor retarder on certain assemblies. The exact requirement depends on the application type, location in the building, and local code enforcement. During your project planning, we review applicable code guidance and make sure the assembly is designed to meet local requirements.

What does a free BATT Insulation assessment from iFOAM of Alpharetta include?

Our free assessment includes a review of your current insulation levels where accessible, identification of obvious air leakage points, and a discussion of comfort and energy concerns. We then provide straightforward recommendations, answer your questions, and give you a clear estimate tailored to your property.

Schedule Your BATT Insulation Consultation

Bumping the thermostat and still feeling drafts or uneven temperatures is frustrating. A properly designed BATT Insulation plan can help create a more comfortable, quieter space and support better use of your heating and cooling.

Our friendly team walks you through every step, from free consultation to final inspection, and backs our work with a 5-year limited workmanship warranty so you can move forward with confidence.

Call iFOAM of Alpharetta at (470) 536-4273 today to schedule your free consultation and find out how BATT Insulation can improve your home or business.

THE PATH TO NEW iNSULATiON
  • STEP
    Schedule a Free Assessment
    During your free in-home assessment, we’ll evaluate insulation levels and provide honest recommendations for improvement. We’ll leave you with a free estimate to know just what to expect, and we’ll answer all your questions.
  • STEP
    Let Our Team Install
    Thanks to our simple and easy installation process, your new insulation system will be installed before you know it! They’ll make sure to get the work done efficiently, accurately, and with minimal disruption to your daily routine.
  • STEP
    Ensure Quality
    With the help of advanced testing techniques and proprietary technology, our team can accurately measure and diagnose insulation performance in any home, ensuring your new installation is working at its best and you’re free of other issues.
  • STEP
    Cleanup
    Before we leave, we’ll make sure to clean up any mess created during the installation process. We take pride in leaving our customers’ homes as clean as we found them.
  • STEP
    Final Inspection
    To finish off our service, we’ll conduct a final inspection to ensure your satisfaction with the installation process and the results. We want to make sure you’re getting the most out of your investment and feeling comfortable in your newly insulated space.
FREQUENTLY ASKED QUESTiONS
  • How Do I Know If My Home Needs New Insulation?

    Here are several signs that your home may need new insulation:

    • Frozen Pipes
    • Uneaven Temperatures Throughout Your Home
    • Cold Floors
    • High Energy Bills
    • Drafts Around Windows and Doors
    • Ice dams

    Finally, consider the age of your insulation:

    • Batt/Fiberglass. Fiberglass insulation should last roughly 7-10 years.
    • Cellulose. Blown-in cellulose should last roughly 10-15 years.
    • Spray Foam. Spray foam should last 80-100 years, or the age of the house (as long as it was installed properly).

    Our experts can provide an accurate assessment of the state of your home’s insulation. We'll consider your energy efficiency with state-of-the-art technology and years of industry know-how.

    Give us a call to book your free consultation!

  • Why Use Spray Foam?

    Spray foam has been rated to have the highest efficiency and R-value when compared to other insulation (like batt fiberglass).

    Furthermore, spray foam's intuitive design allows it to create an airtight seal even in tricky and problematic spaces. It has been proven to keep out air pollutants and help soundproof buildings.

    Visit our blog to learn about spray foam's benefits and why its a great choice for your home.

  • How Much Will My Installation Cost?

    Prices vary from project to project. For an accurate assessment tailor-made to your home's needs, give our team a call today! You can also discover additional insights on why spray foam is worth the cost by visiting our blog.

Explore Our Family Of Brands

/